Surface Preparation:
-The application surface should be made clean from dust,
dirt, oil, paint residue, and similar foreign matters reducing
adherence.
-The surface should be smooth and firm.
-The surface must be moistened before the application.
Mixture Preparation:
25 kg YAPSER 4082 MINART GOLD isslowly added to 5.5 –
6.5 liters of water. Stirred until a homogeneous mixture is
obtained with a trowel or a low-speed mixer, leaving no
lumps.The mortar is rested for 5 minutes and is then mixed
again and made ready for use.
Application:
The prepared mixture is applied on the surface with a steel
trowel in uniform thickness. Application thickness should be
adjusted according to the largest grain size in the material. Excess
material on the surface should be cleaned. The application
surface should be patterned with circular movements with a
plastic trowel. The trowel surface should be cleaned frequently
during the process.
-The patterning process should be done while the material is wet.
-Itshould be applied to the surfaces,that are connected to each
other, at once.
-The surface should not be left as a top coat, after drying, it
should be painted with silicone-added exterior paint.
-After drying (about 2-3 days later), the paint application can
be started.
-In hot and windy weathers, the surface should be moistened
at certain time intervals to preventsudden water loss on the
application surfaces and to eliminate the risk of cracking.
Applications should not be carried out in temperatures below
-5°C.
Applications should not be made on surfaces that are
exposed to sun and wind directly, without taking protective
measures.
-Foreign materialsshould never be mixed into the mortar.
-After application, all used tools should be washed with plenty
of water before drying.
Warnings:
Do not breathe the product directly, as it is cement-based.
Avoid contact with skin and eyes.
Reference Standard:
TS 7847
Color: White
Package: 25 kg kraft bag
Shelf life: 12 months in dry environment and in original package