YAPSER 1052
White Ceramic Adhesive Mortar
YAPSER 1052
YAPSER 1052
White Ceramic Adhesive Mortar
Description:
Cement-based white ceramic adhesive with reduced slip and
extended time.
Areas of Use:
Applied on materials such as tiles, mosaics, ceramics, etc. to be used
on vertical and horizontal surfaces plastered with lean concrete,
reinforced concrete, or cement plaster both indoors and outdoors.
Advantages:
Easy to apply
Does not slip.
It has high adhesive power.
It can be processed easily and for a long time.
Can be used on wet loors in kitchen, bathroom, etc.
Ideal for glass mosaic coating and glass brick applications.
ˇ˘˖˛ˡ˜˖˔˟ˆˣ˘˖˜Ѓ˖˔˧˜ˢˡ˦ʭ Slipping: �
0.5mm Adhesion Strength:
After the Open Holding Period: After minimum 30 minutes
0.5 N/ mm2
Beginning: � 0.5 N/mm2
After Immersion: � 0.5 N/mm2
After Heat Aging: � 0.5 N mm2
After Freeze-Thaw Cycle: � 0.5 N/mm2
Temperature Resistance: (-40°C) – (+80°C)
Fire Reaction Class: A1
*The above values have been obtained through laboratory tests and
are valid for 28 days of the performance.
Application Information:
Application Temperature: (+5°C) – (+35°C)
Mixing Ratio: 4,5 – 6 lt water/ 20 kg
powder Usable Time: 3 hours
Open holding time: 30 min.
Application thickness: 3-10 mm
Time to Get Into Use: 24 hours
Average Consumption: 3 – 5 kg/m2
*These values are valid for 23°C of temperature and 50% relative
humidity. Times may vary depending on ambient conditions.
Surface Preparation:
-The application surface should be made clean from dust, dirt, oil,
paint residue, and similar foreign matters reducing adherence.
-It should be ensured that the application surface is set.
-The surface must be moistened before the application.
-The dusty surface behind the ceramic should be moistened and
wiped.