YAPSER 1051
CERAMIC & TILE ADHESIVE
YAPSER 1051
YAPSER 1051
Ceramic & Tile Adhesive
Description:
Cement-based ceramic adhesive with reduced slip and extended
time.
Areas of Use:
Applied on materials such as tiles, mosaics, ceramics, etc. to be used
on vertical and horizontal surfaces plastered with lean concrete,
reinforced concrete, or cement plaster both indoors and outdoors.
Advantages:
Easy to apply
Does not slip.
High adhesion strength.
It can be processed easily and for a long time.
It can be used on wet loors in the kitchen, bathroom, etc.
ˇ˘˖˛ˡ˜˖˔˟˦ˣ˘˖˜Ѓ˖˔˧˜ˢˡ˦ʭ
Slip: 0.5 mm
Adhesion Strength:
After Open Waiting Time: After at least 30 min. 0.5 N/mm2
-Initial: 0.5 N/mm2
After Dipping in Water: 0.5 N/mm2
After Aging with -eat: 0.5 N/mm2
After Freeze-Thaw Cycle: 0.5 N/mm2
Temperature Resistance: (-40°C) – (+80°C)
Reaction to Fire Class: A1
*The above values have been obtained through laboratory tests and
are valid for 28 days of the performance.
Application Information:
Application Temperature: (+5°C) – (+35°C)
Mixing Ratio: 6 – 7 lt of water / 25 kg of powder
Usable for: 3 hours
Open waiting time: 30 min.
Application thickness: 3-10 mm
Grouting Time: 24 hours
Consumption Average: 3 – 5 kg / m2
These values are valid for 23 ° C and 50% relative humidity. Times
may vary depending on ambient conditions.
Surface Preparation:
-The application surface should be made clean from dust, dirt, oil,
paint residue, and similar foreign matters reducing adherence.
-It should be ensured that the application surface is set.
-The surface must be moistened before the application.
-The dusty surface behind the ceramic should be moistened and
wiped