YAPSER 1002
WHITE Ceramic & Tile Adhesive
YAPSER 1002
YAPSER 1002
Ceramic & Tile Adhesive
Description:
This is a cement-based ceramic and tile bonding mortar with
reduced slipping properties.
Areas of Usage:
It is used to bond small and medium sized materials such as tiles
and ceramics to be used in lateral and vertical surfaces plastered
with lean concrete, ferro-concrete, screed or cement.
Product Advantages:
Easy to apply
Does not slip.
Its adherence is high.
Technical specifications:
Slip: � 0.5 mm
Adhesion Strength:
After Open Time: � 0.5 N / mm2 After at least 20 min
-Initial: � 0.5 N / mm2
After Immersion in Water: � 0.5 N / mm2
After Heat Exposure: � 0.5 N / mm2
After Freeze-Thaw cycle: � 0.5 N / mm2
Temperature Resistance: (-30 ° c) – (+70 °
c) Reaction to Fire Class: A1
*The above values are valid for 28 days of performance, which were
obtained through laboratory tests.
Application Information:
Application Temperature: (+5 ° c) – (+35 ° c)
Mixing Ratio: 4,5-6 lt water / 20 kg powder
Pot life: 2 hours
Open time: 20 min.
Application thickness: 3-10 mm
Grouting Time: 24 hours
Average consumption: 3 – 5 kg / m2
These values are valid for 23 ° c and 50% relative humidity. Times
may vary depending on ambient conditions.
Surface Preparation:
The application surface should be made clean from dust, dirt,
oil, paint residue, and other similar adherence reducing foreign
materials.
care must be taken to ensure that the application surface is set.
The surface must be moistened before application.
The dusty surface behind the ceramic should be moistened and
wiped