YAPSER 1001

Ceramic & Tile Adhesive

YAPSER 1001

Yapser 1001
Ceramic & Tile Adhesive
Description:
This is a cement-based ceramic and tile bonding mortar with
reduced slipping properties.
Areas of Usage:
It is used to bond small and medium sized materials such as tiles
and ceramics to be used in lateral and vertical surfaces plastered
with lean concrete, ferro-concrete, screed or cement.
Product Advantages:
 Easy to apply
 Does not slip.
 Its adherence is high.
Technical specifications:
Slip: � 0.5 mm
Adhesion Strength:
-After Open Time: � 0.5 N / mm2 After at least 20 min
-Initial: � 0.5 N / mm2
-After Immersion in Water: � 0.5 N / mm2
-After Heat Exposure: � 0.5 N / mm2
-After Freeze-Thaw Cycle: 0.5 N / mm2
Temperature Resistance: (-30 ° C) – (+70 ° C)
Reaction to Fire Class: A1
*The above values are valid for 28 days of performance, which were
obtained through laboratory tests.
Application Information:
Application Temperature: (+5 ° C) – (+35 ° C)
Mixing Ratio: 6 – 7 lt water / 25 kg powder
Pot life: 2 hours
Open time: 20 min.
Application thickness: 3-10 mm
Grouting Time: 24 hours
Average Consumption: 3 – 5 kg / m2
* These values are valid for 23 ° C and 50% relative humidity. Times
may vary depending on ambient conditions.
Surface Preparation:
– The application surface should be made clean from dust, dirt,
oil, paint residue, and other similar adherence reducing foreign
materials.
– Care must be taken to ensure that the application surface is set.
– The surface must be moistened before application.
– The dusty surface behind the ceramic should be moistened and
wiped.


Mixture Preparation:
􀀗􀀚􀀅􀁐􀁌􀀅􀀾􀁆􀁕􀁘􀁊􀁗􀀅􀀖􀀕􀀕􀀖􀀅􀁘􀁍􀁔􀁚􀁑􀁉􀀅􀁇􀁊􀀅􀁆􀁉􀁉􀁊􀁉􀀅􀁘􀁑􀁔􀁜􀁑􀁞􀀅􀁙􀁔􀀅􀀛􀀒􀀜􀀅􀁑􀁎􀁙􀁊􀁗􀁘􀀅􀁔􀁋􀀅􀁜􀁆􀁙􀁊􀁗􀀓􀀅􀀅􀀹􀁍􀁊􀀅
mixture then should be blended with a trowel or a low-speed mixer
􀁎􀁓􀀅􀁆􀀅􀁜􀁆􀁞􀀅􀁙􀁍􀁆􀁙􀀅􀁓􀁔􀀅􀆵􀁔􀁈􀁈􀁚􀁑􀁊􀁘􀀅􀁗􀁊􀁒􀁆􀁎􀁓􀀑􀀅􀁚􀁓􀁙􀁎􀁑􀀅􀁆􀀅􀁍􀁔􀁒􀁔􀁌􀁊􀁓􀁊􀁔􀁚􀁘􀀅􀁒􀁎􀁝􀁙􀁚􀁗􀁊􀀅􀁎􀁘􀀅
􀁔􀁇􀁙􀁆􀁎􀁓􀁊􀁉􀀓􀀅􀀹􀁍􀁊􀀅􀁍􀁔􀁒􀁔􀁌􀁊􀁓􀁊􀁔􀁚􀁘􀁑􀁞􀀅􀁒􀁎􀁝􀁊􀁉􀀅􀁒􀁔􀁗􀁙􀁆􀁗􀀅􀁘􀁍􀁔􀁚􀁑􀁉􀀅􀁇􀁊􀀅􀁗􀁊􀁘􀁙􀁊􀁉􀀅􀁋􀁔􀁗􀀅􀀚􀀅
􀁒􀁎􀁓􀁚􀁙􀁊􀁘􀀅􀁆􀁓􀁉􀀅􀁙􀁍􀁊􀁓􀀅􀁒􀁎􀁝􀁊􀁉􀀅􀁆􀁌􀁆􀁎􀁓􀀅􀁙􀁔􀀅􀁒􀁆􀁐􀁊􀀅􀁎􀁙􀀅􀁗􀁊􀁆􀁉􀁞􀀅􀁋􀁔􀁗􀀅􀁆􀁕􀁕􀁑􀁎􀁈􀁆􀁙􀁎􀁔􀁓􀀓
􀀹􀁍􀁊􀀅􀁕􀁗􀁊􀁕􀁆􀁗􀁊􀁉􀀅􀁒􀁎􀁝􀁙􀁚􀁗􀁊􀀅􀁘􀁍􀁔􀁚􀁑􀁉􀀅􀁇􀁊􀀅􀁚􀁘􀁊􀁉􀀅􀁜􀁎􀁙􀁍􀁎􀁓􀀅􀁆􀀅􀁒􀁆􀁝􀁎􀁒􀁚􀁒􀀅􀁔􀁋􀀅􀀗􀀅􀁍􀁔􀁚􀁗􀁘􀀅
and mixtures that are waiting to be used during this period should be
mixed intermittently. Any mortar which has started to harden or has
expired should not be used.
Application:
􀀹􀁍􀁊􀀅􀁕􀁗􀁊􀁕􀁆􀁗􀁊􀁉􀀅􀁒􀁎􀁝􀁙􀁚􀁗􀁊􀀅􀁘􀁍􀁔􀁚􀁑􀁉􀀅􀁇􀁊􀀅􀁘􀁕􀁗􀁊􀁆􀁉􀀅􀁔􀁓􀀅􀁙􀁍􀁊􀀅􀁘􀁚􀁗􀁋􀁆􀁈􀁊􀀅􀁜􀁎􀁙􀁍􀀅􀁙􀁍􀁊􀀅􀆵􀁆􀁙􀀅
part of the trowel to ensure good adhesion and then combed with a
toothed trowel suitable for size of the tile to be used. Ceramics must
􀁇􀁊􀀅􀁇􀁔􀁓􀁉􀁊􀁉􀀅􀁙􀁔􀀅􀁙􀁍􀁊􀀅􀁈􀁔􀁒􀁇􀁊􀁉􀀅􀁒􀁔􀁗􀁙􀁆􀁗􀀅􀁜􀁎􀁙􀁍􀁎􀁓􀀅􀀗􀀕􀀅􀁒􀁎􀁓􀁚􀁙􀁊􀁘􀀓􀀅􀀬􀁔􀁔􀁉􀀅􀁆􀁉􀁍􀁊􀁘􀁎􀁔􀁓􀀅
should be provided by pressing on the laid material by hand and
applying force with rubber hammer.
– Adhesive should be used by applying it to small areas and any
adhesives whose material bonding was delayed and has started to
􀁈􀁆􀁐􀁊􀀅􀁘􀁍􀁔􀁚􀁑􀁉􀀅􀁇􀁊􀀅􀁘􀁈􀁗􀁆􀁕􀁊􀁉􀀅􀁈􀁑􀁊􀁆􀁓􀀅􀁋􀁗􀁔􀁒􀀅􀁙􀁍􀁊􀀅􀁘􀁚􀁗􀁋􀁆􀁈􀁊􀀓
– The excess adhesive in the joint gaps should be scraped before
drying, and the mortars smeared on the surface should be cleaned
with a damp cloth.
􀀦􀁕􀁕􀁑􀁎􀁈􀁆􀁙􀁎􀁔􀁓􀁘􀀅􀁘􀁍􀁔􀁚􀁑􀁉􀀅􀁓􀁔􀁙􀀅􀁇􀁊􀀅􀁈􀁆􀁗􀁗􀁎􀁊􀁉􀀅􀁔􀁚􀁙􀀅􀁎􀁓􀀅􀁙􀁊􀁒􀁕􀁊􀁗􀁆􀁙􀁚􀁗􀁊􀁘􀀅􀁇􀁊􀁑􀁔􀁜􀀅􀀒􀀚􀁴􀀨􀀓
􀀒􀀅􀀼􀁎􀁙􀁍􀁔􀁚􀁙􀀅􀁙􀁆􀁐􀁎􀁓􀁌􀀅􀁕􀁗􀁔􀁙􀁊􀁈􀁙􀁎􀁛􀁊􀀅􀁒􀁊􀁆􀁘􀁚􀁗􀁊􀁘􀀑􀀅􀁆􀁕􀁕􀁑􀁎􀁈􀁆􀁙􀁎􀁔􀁓􀁘􀀅􀁘􀁍􀁔􀁚􀁑􀁉􀀅􀁓􀁔􀁙􀀅􀁇􀁊􀀅
made on surfaces that are exposed directly to sun and wind.
– Foreign materials should never be mixed into the mortar.
– All tools used should be washed after application with water before
drying.
􀀒􀀹􀁍􀁊􀀅􀁌􀁗􀁔􀁚􀁙􀁎􀁓􀁌􀀅􀁕􀁗􀁔􀁈􀁊􀁘􀁘􀀅􀁈􀁆􀁓􀀅􀁇􀁊􀀅􀁘􀁙􀁆􀁗􀁙􀁊􀁉􀀅􀁆􀁋􀁙􀁊􀁗􀀅􀀗􀀙􀀅􀁍􀁔􀁚􀁗􀁘􀀓
􀀒􀀅􀀹􀁎􀁑􀁊􀁘􀀅􀁇􀁔􀁓􀁉􀁊􀁉􀀅􀁜􀁎􀁙􀁍􀀅􀀾􀁆􀁕􀁘􀁊􀁗􀀅􀀖􀀕􀀕􀀖􀀅􀁘􀁍􀁔􀁚􀁑􀁉􀀅􀁓􀁔􀁙􀀅􀁇􀁊􀀅􀁊􀁝􀁕􀁔􀁘􀁊􀁉􀀅􀁙􀁔􀀅􀁜􀁆􀁙􀁊􀁗􀀅􀁋􀁔􀁗􀀅􀁆􀁙􀀅
􀁑􀁊􀁆􀁘􀁙􀀅􀀗􀀙􀀅􀁍􀁔􀁚􀁗􀁘􀀓
– Depending on the application area and the type of ceramic to be
applied, double-sided bonding should be used.
Caution:
Do not breathe the product directly, as it is cement-based. Avoid
􀁈􀁔􀁓􀁙􀁆􀁈􀁙􀀅􀁜􀁎􀁙􀁍􀀅􀁘􀁐􀁎􀁓􀀅􀁆􀁓􀁉􀀅􀁊􀁞􀁊􀁘􀀓
Reference Standard:
􀀹􀀸􀀅􀀪􀀳􀀅􀀖􀀗􀀕􀀕􀀙􀀅􀀒􀀖􀀅􀀔􀀅􀀨􀀖􀀹􀀅􀀨􀁑􀁆􀁘􀁘
C: Cement-based
1: Standard performance
T: Reduced slipping
Colors: Gray
Package:􀀅􀀗􀀚􀀅􀁐􀁌􀀓􀀅􀁐􀁗􀁆􀁋􀁙􀀅􀁕􀁆􀁕􀁊􀁗􀀅􀁇􀁆􀁌􀀅
Shelf life:􀀅􀀖􀀗􀀅􀁒􀁔􀁓􀁙􀁍􀁘􀀅􀁎􀁓􀀅􀁉􀁗􀁞􀀅􀁊􀁓􀁛􀁎􀁗􀁔􀁓􀁒􀁊􀁓􀁙􀀅􀁆􀁓􀁉􀀅􀁎􀁓􀀅􀁔􀁗􀁎􀁌􀁎􀁓􀁆􀁑􀀅􀁕􀁆􀁈􀁐􀁆􀁌􀁎􀁓􀁌

To contact us,
call us or send an e-mail.

Scroll to Top