Mixture Preparation:
25 kg YAPSER TECH 5004 is added slowly to 5.5-7.5 liters of water. The
mixture is combined with a trowel or a low-speed mixer until a homogeneous mixture
is obtained. The homogeneously mixed mortar must be rested for 5 minutes
and then mixed again to prepare it for application.
•The prepared mixture should be used within a maximum of 4 hours, and
the mixtures that are waiting to be used during this period should be mixed
intermittently. Any mortar which hasstarted to harden or has ex-pired
should not be used.
Application:
The prepared mixture should be spread on the surface with the Ƶat part of
the trowel to ensure good adhesion and then combed with a notched trowel
suitable for the size of the tile to be used. Ceramics must be bonded to the
combed mortar within 30 minutes. Good adhesion should be provided by
applying pressure on the laid material by hand and applying force with a rubber
hammer.
The adhesive should be used by applying it to small batches, and any
adhesives whose material bonding was delayed and has started to crust should
be cleaned by scraping off from the surface.
‘onding should be achieved by applying force on the combed mortar
within 30 minutes. This period may be shorter in applications made in
unsuitable ambient conditions such as high temperature, low humidity, and wind.
Bonding process should not be performed on expired mortar and any such mortar
should be scraped off the surface.
The excess adhesive in the Ooint gaps should be scraped off before
drying occurs and any mortar smeared on the surface should be cleaned with a
damp cloth.
Applications should not be carried out in temperatures below -5°C.
Applications should not be made on surfaces that are exposed directly to
sun and wind without taking protective measures.
+oreign materials should never be mixed into the mortar.
After the application, used tools should be washed with plenty of water
before drying occurs.
The grouting process can be started after 24 hours.
Tiles bonded with YAPSER TECH 5004should not be exposed to water for
at least 24 hours.
)epending on the application location and the type of ceramic to be
applied, double-sided bonding should be used.
YAPSER TECH 5004White should be used for light-colored ceramic
applications.
Caution:
Do not breathe the product directly, as it is cement-based. Avoid contact
with skin and eyes.
Reference Standard:
TS EN 12004 -1 C2TES1 Class
C: Cement-based
2: Improved with additional features
T: Reduced slip.
E: Extended Open Time
S1: Deformable
Colors: Gray, White
Packing: 25 kg. kraft paper bag
Shelf life: 12 months in dry environment and in original packaging